A problem occurred while rendering this section
Analog Input Specifications
| Input terminal |
GAIN |
Actual load impedance |
For use with nominal |
Input Level |
Connector |
Balanced / Unbalanced |
| Nominal |
Max. before clip |
| INPUT 1-8 |
+66dB |
10kΩ |
50-600Ω Mics |
-62dBu(0.616mV) |
-42dBu(6.16mV) |
Euroblock(5.08mm pitch) |
Balanced |
| -6dB |
600ΩLines |
+10dBu(2.45V) |
+30dBu(24.5V) |
| ST IN 1,2 |
- |
10kΩ |
600Ω Lines |
-10dBV(316mV) |
+10dBV(3.16V) |
RCA Pin Jack |
Unbalanced |
* In these specifications, 0dBu = 0.775 Vrms., 0dBV = 1.00 Vrms.
* All input AD converters are 24bit linear, 128times oversampling.
* +48V DC ( phantom power ) is supplied to INPUT EUROBLOCK connectors via each individual software controlled switch.
Analog Output Specifications
| Output terminal |
Actual Source impedance |
For use with nominal |
Output Level |
Connector |
Balanced / Unbalanced |
| Nominal |
Max. before clip |
| OUTPUT 1-8 |
75Ω |
10kΩLines |
+4dBu(1.23V) |
+24dBu(12.3V) |
Euroblock(5.08mm pitch) |
Balanced |
* In these specifications, 0dBu = 0.775 Vrms.
*All output DA converters are 24bit, 128times oversampling.(Fs=48kHz)
Digital Input and Output Specifications
| Terminal |
Format |
Level |
IN/OUT |
Connector |
| YDIF In |
YDIF |
RS-422 |
16IN |
RJ45 |
| YDIF Out |
YDIF |
RS-422 |
16OUT |
RJ45 |
| Primary / Secondary |
Dante |
1000BASE-T |
64IN/64OUT |
RJ45 |
Control I/O Specifications
| Terminal |
Level |
Connector |
| GPI 16IN / 8OUT |
IN |
0V-5V (IN 16 L(0V-2.5V) / H(2.5V-24V)) |
Euroblock |
| OUT |
Open Collector |
| +V |
DC5V |
| REMOTE |
RS-232C (BAUD RATE : 38.4kbps or 115.2kbps) |
D-sub 9pin (Male) |
| DCP |
- |
RJ-45 |
