Reverb

The [REVERB] button selects a number of digital reverb effects that you can use for extra depth and expressive power.

To select a reverb type press the [REVERB] button a few times until the indicator corresponding to the desired type lights (the indicators light in sequence each time the [REVERB] button is pressed). No reverb is produced when all indicators are off.

OFF
No reverb effect is selected when no REVERB indicator is lit.

ROOM
This setting add a continuous reverb effect to the sound that is similar to the type of acoustic reverberation you would hear in a room. 

HALL 1
For a "bigger" reverb sound, use the HALL 1 setting. This effect simulates the natural reverberation of a small-size concert hall.

HALL 2
For a really spacious reverb sound, use the HALL 2 setting. This effect simulates the natural reverberation of a large concert hall.

STAGE
A simulation of the type of reverb produced in a stage environment.

NOTE
The default reverb type (including OFF) and depth settings are different for each voice.

Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by using the [minus/NO] and [plus/YES] buttons while holding the [REVERB] button. The depth range is from 0 through 20 (the current depth setting appears on the LED display while the [REVERB] button is held). A setting of "0" produces no effect, while a setting of "20" produces maximum reverb depth. Press the [minus/NO] and [plus/YES] buttons simultaneously while holding the [REVERB] button to recall the default setting for the current voice (default depth settings are different for each voice).

This is the end of the file.
